HOW TO FLASH NOKIA 5233!!!!

LEARN HERE HOW TO FLASH YOUR NOKIA 5233 IN A SIMPLE WAY...










THE BELOW STEPS ARE VERY SENSITIVE ....READ AND FOLLOW THEM VERY CAREFULLY
FIRST OF ALL CHECK THE PRESENT SOFTWARE VERSIONS OF YOUR 5233 AND DOWNLOAD IT..
GOT TO MENU.>Settings>Phone>Phone mgmt>Device updates
THE FIRST LINE TELLS YOU THE SOFTWARE VERSION.
YOU ARE MOST LIKELY TO HAVE FOLLOWING TWO VERSIONS


AFTER YOU DOWNLOAD REQUIRED SOFTWARE CHOOSE THE CUSTOM FIRMWARE.
WELL I THINK Revenge^6 9hs No CPu MOD IS THE BEST 
BUT YOU CAN ALSO TRY AOV (ARUN OR VIC) Mega Elite Mod V28 .
NOW WHEN YOU HAVE BOTH THE THINGS(SOFTWARE VERSION AND CUSTOM FIRMWARE ) DOWNLOADED ..
DOWNLOAD JAF (THE FLASHING SOFTWARE) AND A SUPPORTING FILE.
EXTRACT JAF AND INSTALL JAF IN C DRIVE
THEN PASTE THE SUPPORTING FILE IN C:\Program Files\ODEON\JAF.
THEN EXTRACT OGM_JAF_PKEY_Emulator_v 5.
EXTRACT THE SOFTWARE VERSION FILES (HERE MUST BE 8 FILES)AND COPY THEM IN C:\Program Files\Nokia\phoenix\products\RM-625       FOLDER .THEN EXTRACT AOV OR REVENGE( WHICHEVER CHOSEN )MOD .
  • FOR AOV Mega Elite Mod V28
(FOR V21.1.102)
  1. COPY THE THREE FILES OF AOV Mega Elite Mod V28 FOLDER (EXTRACTED) AND PASTE IT TO C:\Program Files\Nokia\phoenix\products\RM-625
(IT WILL ASK FOR FILE REPLACEMENT CONFIRM IT)


(FOR V40.1.003 )
  1. FIRST RENAME THE THREE FILES OF AOV Mega Elite Mod V28 FOLDER (EXTRACTED)  
RM-625_21.1.102_001_000_U001.uda.fpsx       TO     RM625_40.1.003_001_001_U001.uda.fpsx
RM-625_21.1.102_C01_prd.rofs3.fpsx               TO      RM-625_40.1.003_C01_prd.rofs3.fpsx


      2.  THEN COPY THE RENAMED FILES TO  C:\Program Files\Nokia\phoenix\products\RM-625

(IT WILL ASK FOR FILE REPLACEMENT CONFIRM IT)









  • FOR REVENGE^6 9hs No CPu MOD.
(FOR V21.1.102)
  1. COPY THE THREE FILES OF Revenge^6 9hs No CPu FOLDER (EXTRACTED) AND PASTE IT TO C:\Program Files\Nokia\phoenix\products\RM-625
(IT WILL ASK FOR FILE REPLACEMENT CONFIRM IT)


(FOR V40.1.003 )
  1. FIRST RENAME THE THREE FILES OF Revenge^6 9hs No CPu FOLDER (EXTRACTED)  
RM-625_21.1.102_001_000_U001.uda.fpsx       TO     RM625_40.1.003_001_001_U001.uda.fpsx
RM-625_21.1.102_C01_prd.rofs3.fpsx               TO      RM-625_40.1.003_C01_prd.rofs3.fpsx
RM-625_21.1.102_prd.rofs2.V21                       TO      RM-625_40.1.003_C01_prd.rofs2.V21

      2.  THEN COPY THE RENAMED FILES TO  C:\Program Files\Nokia\phoenix\products\RM-625
(IT WILL ASK FOR FILE REPLACEMENT CONFIRM IT)



NOW YOU HAVE ALL FILES READY 


  1. NOW EXTRACT OGM_JAF_PKEY_Emulator_v 5 ( DOWNLOADED WITH JAF SETUP) , AND RUN OGM_JAF_PKEY_Emulator_v 5
THEN OGM_JAF_PKEY_Emulator_v 5 WILL OPEN CLICK ON GO...
AFTER A FEW SECONDS THE FOLLOWING ERROR WILL APPEAR 


  2.  CLICK ON OK...
        THEN JAF BY ODEON WILL RUN.
      3. SELECT BB5 ON UPPER SIDE.. THEN MARK Manual Flash AND Dead USB and UNMARK  Normal Mode AND CRT 308 AND THEN MARK Use INI THEN WAIT FOR 20 SECONDS .THEN A WINDOW WILL OPEN IN WHICH YOU HAVE TO SELECT YOUR PHONE MODEL .

[NOTE: IF NOKIA 5233 IS NOT IN THE LIST THEN IT MEANS YOU FORGOT TO COPY PASTE jaf_nok4models FILE IN C:\Program Files\ODEON\JAF ....... DON'T WORRY DO IT NOW AND RUN OGM_JAF_PKEY_Emulator_v 5 AGAIN ]

WHEN YOU WILL SELECT YOUR PHONE THE 4 TABS OF UPPER LINE WILL TURN GREEN...

NOW BACKUP YOUR PHONE MEMORY(VERY ESSENTIAL) ,THEN HARD RESET YOUR PHONE BY DIALING *#7370# THEN ENTER PASSWORD (BY DEFAULT IT IS 12345)  

 TURN OFF YOUR MOBILE , REMOVE MEMORY CARD AND SIM CARD. AND CONNECT IT TO PC VIA USB..... AND CLICK FLASH 

THERE WILL BE A WARNING MESSAGE CLICK ON YES ... THEN PRESS POWER BUTTON OF PHONE FOR 2 SECONDS.

FLASHIG WILL START ...IT WILL TAKE HARDLY 3 MINUTES THEN IN THE END DoNE!!!! WILL BE FLASHED  ....... REMOVE THE USB WIRE ..

WAIT FOR THE PHONE TO START  THEN AGAIN HARD RESET YOUR PHONE BY DIALING *#7370# THEN ENTER PASSWORD (BY DEFAULT IT IS 12345) .....

EXPERIENCE THE CHANGES ....USE THE PHONE FOR 1 HOUR AND THEN TURN OFF AND ON, YOUR PHONE WILL WORK FASTERRRRRRRR........









10 comments:

  1. my phone went dead while pooling when i was flashing my phone............... What to do now....

    ReplyDelete
  2. Read the steps again..... I think you chose wrong software version ....

    ReplyDelete
  3. whats the difference between speed type2 and dejavu effects variants.

    And also whats the difference between No cpu mod and Cpu mod. pls reply

    ReplyDelete
  4. Bharat !!! i don't know technichally,but as far as i have experienced...... speed type 2 is for faster effects....and dejavu effects variants have good visual effects.......

    and no cpu is for better battery life......cpu mod is for fast performance of device......

    ReplyDelete
  5. im having software version 51.1.002
    What to do now
    Plz help

    ReplyDelete
  6. guys tell me.. is it working or not?????
    coz m worried abt....

    ReplyDelete
  7. I AM HAVING 51.1.002
    CAN I GO FOR 2ND VERSION OPTION GIVEN IN THIS

    ReplyDelete
  8. I have did all the Steps correctly but it still comes error at Polling Phone and now my phone is dead. help!!

    ReplyDelete